Bosch Rexroth Tightening System 350 - Electrical Connections between the Tightening System and the Production Environment; Display

88/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
4.2.8 Electrical connections between the tightening system and the production environment
The tightening system, as well as the communication unit or control unit, have a variety of electrical
interfaces for programming, controlling, and results data communication.
4.2.8.1 Programming-interfaces
The computer with the BS350 operating system can be connected via the following interfaces:
4.2.8.2 Controller interfaces
Depending on the compact system, various interfaces are available for transmission of control signals.
The CS compact system is equipped with interfaces behind the cover of the compact system housing.
For an overview of the interfaces, refer to table
3–1 on page 42.
4.2.8.3 Results output interfaces
Depending on the compact system, various interfaces are available for communication of tightening
results. The CS compact system is equipped with interfaces behind the cover of the compact system
housing. For an overview of the interfaces, refer to table
3–1 on page 42.
4.2.9 Display
Depending on the model, the CS351 compact system is equipped with a TFT display (CS351E-G (IL)
and CS351S-G (IL)) or an LC display (CS351E-D (IL), CS351S-D (IL), CS351E-D NK, and CS351S-D
NK).
LTU350/1, LTS350D and LTE350D are also equipped with LC displays.
An external monitor can be connected to the CS351E-D (IL) or CS351S-D (IL) compact system and to
the KE350 G (IL) to display tightening results via the DVI interface XDVI (see Fig. 4–19). This standard
function is not available on the KE and may need to be implemented individually via target visualization
with IndraLogic
Table 4–16: Programming interfaces
Interface Implementation on device
Ethernet
X7E1 behind the cover of the CS351 compact system housing (except
CS351x-D NK)
USB (device)
X3U3 at the front of the CS351 compact system
Table 4–17: Controller interfaces
Interface Location on device
Parallel 24 V
1
1 E.g. for connecting the program selector, socket tray, or start switch (see page 112)
IM24V module inserted in slot B1 or B2
Field bus Type A interface module inserted in slot A.
Table 4–18: Results output interfaces
Interface Location on device
RS232, serial
X3C1 CS351 compact system or at KE350(G IL)
Ethernet
X7E1 compact system CS351 or at KE350(G IL)
Field bus Type A interface module inserted in slot A