Bosch Rexroth Tightening System 350 - Abbreviations

16/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
1.4.4 Abbreviations
The following abbreviations are used in this documentation:
Table 1–3: Abbreviations for the components in the tightening system
Abbreviation Explanation
BT356 Subrack system 350 for max. 6 tightening channels
BS350 Operating System 350
CS Compact System
ES ErgoSpin hand-held nutrunner
HMI Human-machine interface
IL Integrated logic
IM Interface module
IM24V 24V interface module
IMdev DeviceNet interface module
IMecat IMecat interface module
IMenip EtherNet/IP interface module
IMenip2 EtherNet/IP interface module
IMmtcp ModbusTCP interface module
IMpdp PROFIBUSDP interface module
IMpnio PROFINETIO interface module
IMpnio2 PROFINETIO interface module
KE350 System 350 communication unit without DVI interface
KE350G IL System 350 communication unit with DVI interface and integrated logic
LT35x Size-dependent servo amplifiers for System 350 stationary tightening technology
LTS350D Servo amplifier for tightening spindle
LTU350/1 Servo amplifier for System 350 ErgoSpin
LTE350D Servo amplifier for System 350 ErgoSpin
MC/DMC Measurement transducer
NK350 System 350 network coupler
NK350S System 350 network coupler with external power supply
SB356 System 350 system box for max. 6 tightening channels
SE352 System 350 controller for two-channel operation
SE352M System 350 controller for two-channel operation with slot for B module
PLC Programmable logic controller
VM350 System 350 power supply module