3 608 878 300 Tightening Technology | Bosch Rexroth AG 603/641
System 350 | 3 608 878 300/2019-03
7.6.3 KE configuration offline
If the configuration of the KE is already known before commissioning, it can be generated in offline mode.
For this purpose, select File New KE configuration in the BS350 menu bar. The following window
will appear:
Fig. 7–32: KE configuration offline using the KE350 as an example
The KE and its interfaces have to be configured and parameterized completely. To do this, double click
the respective line and configure according to Setting up installed interfaces (page 587).
The created KE configuration can be stored as a file on the PC (see Sending and saving (page 542)).
The configuration must be sent to the KE before commissioning.
To Next Page
Loading...
