56/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
3.5.2 Modular system
The system can be externally connected to an entire system via various control and results output
interfaces. The internal communication takes place via bus systems (see Fig. 3–17). This enables
integration of the electronic components in card rack fields or system boxes, as well as the single-cable
solution between the servo amplifier and the tightening spindle or ErgoSpin.
Results
Field bus
Internal bus
Tightening cell
Serial coupling
- RS232
- RS422
- 20 mA
WLAN
Access
Point
To Next Page
Loading...
