316/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
6.5 Printer-communication
The "Printer Communication" documentation describes the use of serial interfaces in the Tightening
System 350 for tightening results output on a printer or other receiving device (e.g. computer with
terminal program).
This service is available for the tightening system. Tightening application results are output via the
communication unit in the Tightening System 350.
• Results output on printer (page 317)
• Formats of the results output (page 320)
• Chronological sequence of the tightening result data output process (page 322)
• Error messages in connection with the results output via a printer (page 324)
Examples of tightening systems with data output on a printer
The tightening results output on a printer is possible centrally for the entire tightening cell in conjunction
with a communication unit. Figure 6–62 shows this type of tightening system with tightening spindles.
The compact system can directly output tightening results on a printer. Figure 6–63 shows an example
of such a tightening system (compact system with hand-held nutrunner) with data output on a printer (1).
Data output on a printer (1) for a compact system with tightening spindle is identical.
Fig. 6–62: Tightening system with 5 channels and communication unit
(1) Data output on a printer
To Next Page
Loading...
