Bosch Rexroth Tightening System 350 - Page 315

3 608 878 300 Tightening Technology | Bosch Rexroth AG 315/641
System 350 | 3 608 878 300/2019-03
Settings at the BS350 operating system
Set the size of the send range when configuring the communication unit. Proceed as follows:
1. In the BS350 operating system, click System  KE configuration.
This function calls up the current configuration of a communication unit.
2. Double click the line A to open the associated parameters dialog.
3. Define the size of the data receive and send range.
6 bytes have to be taken into account for the handshake at the multitelegram:
– In the receipt range (receive data), at least 6 bytes have to be defined.
– In the send range (send data), at least 7 bytes (6 bytes handshake + x bytes data) have to be
defined.
The multitelegram send range is activated via the KE field bus system data. Proceed as follows:
1. Select KE field bus system data.
2. Select Multitelegram PLC master mode from the Send range list.
3. Edit the size of the send range for the individual channels.