Bosch Rexroth Tightening System 350 - Integration in an entire system

3 608 878 300 Tightening Technology | Bosch Rexroth AG 55/641
System 350 | 3 608 878 300/2019-03
3.4.6.2 IndraWorks
The uniform engineering framework IndraWorks is consistently available for all systems from Rexroth. It
allows for fast and transparent access to all functions and system data of the automation components.
Programming is implemented uniformly, according to the PLC standard IEC 61131-3.
3.5 Integration in an entire system
3.5.1 Compact system
The tightening system can be integrated in cross-system external installations via various control and
results output interfaces. The following figure (figure 3–16) shows the communication possibilities of a
compact system with connected ErgoSpin hand-held nutrunner. Compact systems with connected
tightening spindle offer the same options.
Fig. 3–16: Compact System communication options
All information in this section refer to Rexroth tightening spindles and the ErgoSpin hand-held nutrunner.
For information on the Nexo cordless Wi-Fi nutrunner, please refer to the "Nexo" documentation.
Tightening cell
Serial coupling
- RS232
- RS422
- 20 mA
Field bus
24V I/O
TCP/IP
ErgoSpin hand-held nutrunner
Printer / scanner
Results
WLAN
IM V24
PC / Laptop
Point
Access