3 608 878 300 Tightening Technology | Bosch Rexroth AG 247/641
System 350 | 3 608 878 300/2019-03
2. Double click the line CS to view the interfaces.
Fig. 6–20: Configuration of the X7E1 Ethernet interface at the compact system
3. Double click the line X7E1 to open the associated parameters dialog.
To configure the Ethernet interface of the KE350 communication unit:
1. In the BS350 operating system, click System KE configuration.
This function opens the KE configuration currently on the controller.
2. Double click the line X7E1 to open the associated parameters dialog.
Fig. 6–21: Configuration of the Ethernet interface at the communication unit
To Next Page
Loading...
