3 608 878 300 Tightening Technology | Bosch Rexroth AG 637/641
System 350 | 3 608 878 300/2019-03
Saving a configuration file
Click on File Save to save a configuration file.
Opening a configuration file
Click on File Open to open the respective *.nexo configuration file.
Sending a configuration file
Click on Data Send to transfer the configuration file to the KE controller component or the CS351
connected via PC Interface. The Send option is only active if the user is logged on to the controller
component.
Before sending, the BS350 checks the electronic name plate to determine whether it is an IL component
and carries out the download depending on whether a IL component is available.
If the file contains invalid entries, an error message is displayed and the sending process is canceled.
The configuration file can be found under the CS/KE controller in the directory CoDeSys or on the local
operating computer.
Table 7–41: Nexo configuration
Element Description
IP address Preset IP address: 0.0.0.0
Double click on the IP address to open the default web browser providing the IP
address or the DNS name of the cordless Wi-Fi nutrunner.
Channel Definition of the node ID
Send NXC file With this button, the NXC file is transmitted to the controller. The button is only active
if the user is logged on to the controller component.
Before sending, the BS350 checks the electronic name plate to determine whether
it is an IL component and carries out the download depending on whether a IL
component is available.
Click on the button to add new entries.
–Name
Default setting: New Nexo. Enter the name.
This function can also be accessed via New in the context menu.
Press this button to delete a selected entry.
This function can also be accessed via Delete in the context menu.
Click on the button to change the name of the Nexo cordless Wi-Fi nutrunner.
This function can also be accessed via Edit in the context menu.
Moves the selected entry up.
This function can also be accessed via Up in the context menu.
Moves the selected entry down.
This function can also be accessed via Down in the context menu.
To Next Page
Loading...
