Canon MF8580Cdw - Switching 1-Sided and 2-Sided Printing (Mf8580 Cdw; Mf8550 Cdn; Mf8540 Cdn Only)

0ALJ-04K
Switching 1-Sided and 2-Sided Printing (MF8580Cdw / MF8550Cdn /
MF8540Cdn Only)
If you are using the MF8580Cdw / MF8550Cdn / MF8540Cdn, you can make both 1-sided and 2-sided
printouts. The default setting is [2-sided Printing]. Change the setting as necessary.
NOTE
2-sided printing may not be available with some sizes and types of paper. Paper
[Basic Settings] tab
Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet Printing] Select the
position to bind in [Binding Location]
[OK]
[1-sided/2-sided/Booklet Printing]
Select [1-sided Printing] or [2-sided Printing].
NOTE:
For [Booklet Printing], see
Printing Booklet (MF8580Cdw / MF8550Cdn / MF8540Cdn Only).
[Binding Location]
Specify the position to bind the printouts with a binding tool such as a stapler. Printing orientation will be changed depending on
the specified binding position. To specify the margin width for the binding position, click [Gutter].
[Long Edge [Left]]
Prints images in such a way that the printed pages are opened horizontally when bound.
[Short Edge [Top]]
Prints images in such a way that the printed pages are opened vertically when bound.
[Gutter]
Specify a binding margin.
㻞㻜㻜㻌㻛㻌㻢㻣㻢