0ALJ-0A4
Enabling SSL Encrypted Communication for the Remote UI
You can encrypt communication between the machine and a Web browser on the computer by using Secure Sockets Layer (SSL). SSL is
a mechanism for encrypting data sent or received over the network. SSL must be enabled when the Remote UI is used for specifying
settings for IPSec (Pre-Shared Key Method), IEEE 802.1X authentication (TTLS/PEAP), or SNMPv3. To use SSL for the Remote UI, you
need to set a key pair and enable the SSL function. Generate or install the key pair for SSL before enabling SSL (
Configuring
Settings for Key Pairs and Digital Certificates).
Start the Remote UI and log on in System Manager Mode. Starting Remote UI
Click [Settings/Registration].
Click [Network Settings] [TCP/IP Settings].
Click [Key and Certificate...] in [SSL Settings].
Click [Register Default Key] on the right of the key pair you want to use.
1
2
3
4
5
㻠㻟㻝㻌㻛㻌㻢㻣㻢
To Next Page
