0ALJ-086
Viewing Network Settings
Viewing IPv4 Settings
Viewing IPv6 Settings
Viewing the MAC Address
Viewing Wireless LAN Settings and Information (MF8580Cdw / MF8280Cw Only)
NOTE
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly
configured. This problem can be solved by setting a certain interval before the machine starts communicating.
Setting a
Wait Time for Connecting to a Network
You can print a list of the current network settings.
User Data List/System Manager Data List
(Status Monitor) <Network Information> <IPv4> Select the setting to view
(Status Monitor) <Network Information> <IPv6> Select the setting to view
Press .
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the
Machine
Select <Ethernet Driver Settings>, and press .
Viewing IPv4 Settings
Viewing IPv6 Settings
Viewing the MAC Address
1
2
3
㻟㻠㻡㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
