0ALJ-069
Changing Default Settings
The default settings are the settings that are displayed whenever you turn ON the machine, or when you press . If you change these
default settings to match the operations that you perform frequently, you can eliminate the need to configure the same settings every
time you scan.
USB memory
<Scan Settings> <USB Memory Settings> <Change Default Settings> Select the setting
Change
the
default
value
of
the
selected
item
<Apply>
Settings
Select the item you want to set, and change the default value.
E-mail
<Scan Settings> <TX Function Settings> <Change Default Settings> <E-Mail>
Select the setting Change the default value of the selected item <Apply>
Settings
Select the item you want to set, and change the default value.
Shared folder
<Scan Settings> <TX Function Settings> <Change Default Settings> <Windows (SMB)>
Select the setting Change the default value of the selected item <Apply>
㻟㻝㻢㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
