0ALJ-0E5
Transfer Belt
Dirt may adhere to the transfer belt inside the machine and cause the print quality to deteriorate. To clean the transfer belt, perform the
following procedure. Note that you cannot clean the transfer belt when the machine has documents waiting to be printed.
Press .
Use
/
to select
<Adjustment/Maintenance>,
and
press
.
Select <Clean ITB>, and press .
Press .
Cleaning starts. When the <Finished.> message is displayed approximately 1 to 2 minutes later, press to return to the main
screen.
1
2
3
4
㻡㻥㻝㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
