0ALJ-08E
Configuring the Machine for Scanning to E-mail
Before configuring the machine for scanning to e-mail, check the setup flow shown below.
Make sure that the machine and the computer are correctly connected.
Connecting via Wireless LAN (MF8580Cdw / MF8280Cw Only)
Connecting via Wired LAN
Make sure that you have the following information:
The IP address of the machine Viewing Network Settings
An e-mail address to be registered as a destination
Information about the e-mail server, including the SMTP server name, port numbers, whether
authentication is required, and the user name and password for authentication.
NOTE:
For more information about the e-mail server settings, contact your Internet service provider or Network
Administrator.
Make sure that the computer meets the following system requirements for the Send Function
Setting Tool:
Operating system
Windows XP/Vista/7/8/Server 2003/Server 2008/Server 2012
Web browser
Microsoft Internet Explorer 7.0 or later
Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at least 256 colors
NOTE:
Also make sure that <Use HTTP> and <Remote UI On/Off> are set to <On>.
Disabling HTTP
Communication
Disabling Remote UI
Set the machine configuration. Configuring Basic E-mail Settings
You can also configure detailed e-mail settings, such as authentication and encryption depending on your
needs.
Configuring Advanced E-mail Settings
㻟㻡㻤㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
