Canon MF8580Cdw - Page 480

On
SNMPv3 Settings
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.
Off
On
Acquire Printer Management Information from Host
Enable or disable the monitoring of printer management information from a networked computer running SNMP-compatible software.
Off
On
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Toolbox and when browsing
or specifying the machine settings over the network.
Off
On
<Network Settings> <SNMP Settings> <SNMPv1 Settings> Select <Off> or
<On>
Restart the machine
<Network Settings> <SNMP Settings> <SNMPv3 Settings> Select <Off> or <On>
Restart the machine
<Network Settings> <SNMP Settings> <Acquire Printer Management Information from
Host>
Select <Off> or <On> Restart the machine
Dedicated Port Settings
<Network Settings> <Dedicated Port Settings> Select <Off> or <On> Restart
the machine
㻠㻤㻜㻌㻛㻌㻢㻣㻢