When using paper that has been preprinted with a logo, you need to change how it is facing when you perform 1-
sided and 2-sided printing.
NOTE:
We recommend selecting <Speed Priority> if you do not need to consider which side to print on.
<Print Side Priority>
To print on a specific side of paper, you do not need to flip over paper in the paper source whether 1- or 2-sided
printing is selected.
NOTE:
If
<Print Side
Priority>
is
set for
a
paper
source that
is
loaded
with
paper
you
cannot
use
for
2
-sided
printing
(
Paper), <Speed Priority> is applied to the paper source instead. In this case, you need to load the paper in
the same way as when <Speed Priority> is selected (
Loading Preprinted Paper).
1
-sided
printing
speed
may
be
slower
when <Print Side
Priority>
is
selected.
㻠㻥㻟㻌㻛㻌㻢㻣㻢
To Next Page
