Off
On
Use this function if color shift has blurred the image.
Correcting "Print Color Mismatch"
Adjust the threshold value to determine whether to print black text in color documents by using only black toner or by using a mixture of
black and color toners. You can set values for the feeder and the platen glass separately.
Adjusting Values for Text Color
Reproducibility in Color Documents
Feeder
Seven Levels
Platen Glass
Seven Levels
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
Special Paper Processing
When printing on the back side of printed paper, rough paper, or envelopes, the print results may be improved by adjusting the
following settings.
Manual Back Side Settings (for 2-Sided Only)
If printouts on the back side of printed paper are too light, select <On>. You can specify this setting separately for each paper
source.
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2
Off
On
<Adjustment/Maintenance> <Auto Correction Settings> <Correct Print Color Mismatch
When Main Power is ON>
Select <On> or <Off>
Correct Print Color Mismatch
Black Text Processing for Color
Special Processing
*
<Adjustment/Maintenance> <Special Processing> <Special Paper Processing>
<Manual Back Side Settings (for 2-Sided Only)> Select the paper source <On>
㻡㻞㻥㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
