Cisco D9887B User Manual

Dual MPEG over IP Input/ UDP Output Option
78-4043743-01 Rev A 99
IP Address/Subnet Mask/Gateway
1 Use the Up and Down buttons to move the cursor to "IP Address," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the IP, then press the Enter button to save the selection.
3 The cursor will now be on "Subnet Mask."
4 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the Subnet Mask, then press the Enter button to save
the selection.
5 The cursor will now be on "Gateway."
6 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to change the Gateway, then press the Enter button to save the
selection.
MAC Address
This option will show the physical MAC Address of the MPEG/IP card.
Use the Up and Down buttons to move the cursor to "MAC Address" to view the
MPEG/IP card’s physical MAC Address.

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English