DC Power Connection (if equipped)
Using the proper power connections is vital to the safe operation of the D9887B
receiver. The D9887B receiver is intended for use in 40-65 VDC systems. The power
supply will automatically detect the system it is connected to. When installing the
D9887B receiver, the power supply MUST be used in conjunction with an over-
current protective device rated at 50 V, 5 A, type: Slow-blo, as part of battery-
supply circuit.
WARNING:
Failure to include an over-current protective device could cause damage to the
D9887B receiver, personnel, or property.
To Next Page
Loading...
