Cisco D9887B - SMPTE 333 M Configuration

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
162 78-4043743-01 Rev A
SMPTE 333M Configuration
The D9887B receiver can be configured to output SMPTE 333M Closed Caption
signals from the SMPTE 333M port on the back of the unit.
1 Press the Menu button.
2 Use the Up and Down button to move the cursor to "SMPTE 333M," then press
the Enter button.
3 Press the Enter button one more time to edit "333M."
4 Use the Up and Down buttons to enable or disable SMPTE 333M, then press the
Enter button to save the selection.