Cisco D9887B User Manual

Quick Start Guide
78-4043743-01 Rev A 5
Quick Start Guide
To get the D9887B receiver up and running there is a few things that need to be
done.
1 Select the desired input as active.
2 Setup the decoder with the proper PIDs.
3 Setup the desired output(s).
The easiest way to set these options up is to refer to Using the Front Panel to
Configure the D9887B HDTV Modular Receiver (on page 21).

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English