signal detected.
 SD Down-Conversion Error – The conversion to an SD output format from HD
failed because the HD frame rate is not 29.97 (for NTSC) or 25 / 50 (for PAL).
 4:2:2 Conversion Error – Generated when chroma format is 4:2:2 and the native
resolution is 1080 and the output is 720, video scaling is not possible.
 Video No Sync Error – The video synchronization is not taking place due to the
large difference between the PTS and PCR (> 6 seconds).
Audio
 DolbyE Not Decoding Error - The DolbyE PID has been set but is not being
decoded.
 Audio (N) Not Decoding Error - Audio Decoder (N) didn’t receive a new audio
frame within 3 seconds.
 Audio (N) Unknown Error - Audio Decoder (N) does not recognize the audio
stream.
System
 Fan Error - The fan is spinning at less than 500 RPM.
 Temperature Error - The internal temperature has exceeded 70 Celsius.
 DPI Stream Type Locked Error - User is not licensed to decode the selected
stream.
To Next Page
Loading...
Need help?
General
