2 Enter a name for the profile.
Note: The profile name should be no more than 15 characters long.
3 Click the OK button to save the profile.
4 Click the Close button after the profile has been successfully saved.
Deleting a Profile
If a given profile is no longer needed or more space is needed on the D9887B receiver
for more profiles, it may be necessary to delete a profile. To delete a profile, use the
following steps:
1 Use the drop-down menu to select the profile to be deleted.
2 Click the Delete button.
3 A dialog box will appear and ask, "Are you sure you want to delete this profile?."
Be sure to check the profile name in the drop-down box because that is the
profile that will be deleted.
4 Click the Yes button in the dialog box to confirm the delete.
5 After the profile has been deleted, click the Close button to close the dialog box.