Cisco D9887B - Temperature; Time

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
166 78-4043743-01 Rev A
Temperature
This lists the temperature inside the D9887B receiver unit in both °C and °F.
1 Use the Up and Down button to move the cursor to "Temperature," then press
the Enter button.
2 Press the Exit button to return to the System menu.
Time
Allows setting and displaying to the unit’s clock.
Use the Up and Down button to move the cursor to "Time," then press the Enter
button.
Set Auto Update
1 Use the Up and Down button to move the cursor to "Auto Update," then press
the Enter button.
2 Use the Up and Down button to select "Off" or "On," then press the Enter button
to save the selection.
Display the Current Time
1 Use the Up and Down button to move the cursor to "Check Time," then press the
Enter button.
2 Press the Exit button to return to the Time menu.