Cisco D9887B User Manual

MPEG-2 Decoder with Genlock (1 Video, 4 Audio) Option
78-4043743-01 Rev A 229
MPEG-2 Decoder with Genlock (1 Video, 4 Audio)
Option
General –
TS Data Rate:
1-160 Mb/s
Video Decoder –
Compatibility Standard:
MPEG-2 4:2:2 MP@HL & MP@ML
Video Bit Rate:
MPEG-2 1-80 Mbps (dependent on profile)
Primary Video Formats:
1080i@ 25 Hz, 29.97 Hz, 30 Hz
720p@ 50 Hz, 59.94 Hz, 60 Hz
480p@ 59.94 Hz
480i@ 29.97 Hz
576i@ 25 Hz
Format Scaling:
Output Format Selectable
Display Modes:
Letterbox, Cropped, & Anamorphic
Aspect Ratio:
16x9, 4x3 (Selectable - format dependent)
Audio Decoder –
Output Formats:
IEC-60958 (uncompressed)
IEC-61937 (compressed)
PCM Downmix
Allowed MPEG-2 PES Formats:
MPEG-2
MPEG-1
Dolby Digital
Up to 4 Dolby E PIDs (with 8707A)
MPEG-2 AAC ADTS
Service Source:
MRD Configuration 1 Opt 1/3 (2 services)
PCM Downmix (selectable):
L/R (Stereo), Lt/Rt (Surround), Mono1, Mono2
Modes (selectable):
User defined, Monitor, Transmission

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English