Cisco D9887B - Page 151

MPEG-2/MPEG-4 4:2:0 Decoder (1 Video, 2 Audio) Option
78-4043743-01 Rev A 127
Mode
1 Use the Up and Down buttons to move the cursor to "Mode," then press the
Enter button.
2 Use the Up and Down buttons to select the desired downmix type ("Monitor",
"Transmission", and User"), then press the Enter button to save the selection.
The following are set for each Mode:
Mode
Compression
Downmix
Dynamic Range
User
Custom 1
2/0 LR
Disabled
Monitor
Line Mode
2/0 LR
Enabled
Transmission
RF Mode
2/0 LtRt
Disabled
Each Mode allows the following to be changed:
 User: Compression, Downmix, Dynamic Range
 Monitor: Compression
 Transmission: no changes
Compression
1 Use the Up and Down buttons to move the cursor to "Compress," then press the
Enter button.
2 Use the Up and Down buttons to select the desired compression ("RF Mode",
"Line Mode", "Custom 0", "Custom 1"), then press the Enter button to save the
selection.