Cisco D9887B User Manual

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
158 78-4043743-01 Rev A
Connection 1
1 Use the Up and Down buttons to select "Ip1," then press the Enter button.
2 Use the Up and Down buttons to change the character and then the Left and
Right buttons to change the IP address, then press the Enter button to save the
selection.
3 Use the Up and Down buttons to select "Port1," then press the Enter button.
4 Use the Up and Down buttons to change the character and then the Left and
Right buttons to change the Port1 value, then press the Enter button to save the
selection.
Connection 2
1 Use the Up and Down buttons to select "Ip2," then press the Enter button.
2 Use the Up and Down buttons to change the character and then the Left and
Right buttons to change the IP address, then press the Enter button to save the
selection.
3 Use the Up and Down buttons to select "Port2," then press the Enter button.
4 Use the Up and Down buttons to change the character and then the Left and
Right buttons to change the Port 2 value, then press the Enter button to save the
selection.

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English