Cisco D9887B User Manual

Audio Setup
78-4043743-01 Rev A 243
"Custom 0" disregards the Dolby dialog normalization data and runs at a fixed gain.
Choosing "RF" as the compression mode will increase the gain by 11 dB for the
analog outputs, AES digital outputs set to PCM, and any embedded outputs set to
PCM.
If you want to run with no processing, set "User / Custom 1 / L/R / Dynamic
Range" to disabled. This will still allow gain changes called for in the Dolby
metadata.

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English