Cisco SPA IP Phone Field Reference
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 245
B
ReINVITE Expires ReINVITE request Expires header value. If you enter 0,
the Expires header is not included in the request.
Ranges from 0 to
19999999999999999999999999999999.
Defaults to 30
Reg Min Expires Minimum registration expiration time allowed from the
proxy in the Expires header or as a Contact header
parameter. If the proxy returns a value less than this
setting, the minimum value is used.
Defaults to 1 second.
Reg Max Expires Maximum registration expiration time allowed from the
proxy in the Min-Expires header. If the value is larger
than this setting, the maximum value is used.
Defaults to 7200.
Reg Retry Intvl (See note
below)
Interval to wait before the IP phone retries registration
after failing during the last registration.
Defaults to 30.
Reg Retry Long Intvl (See
note below)
When registration fails with a SIP response code that
does not match<Retry Reg RSC>, the IP phone waits
for the specified length of time before retrying. If this
interval is 0, the IP phone stops trying. This value
should be much larger than the Reg Retry Intvl value,
which should not be 0.
Defaults to 1200.
Reg Retry Random Delay Random delay range (in seconds) to add to <Register
Retry Intvl> when retrying REGISTER after a failure.
This feature was added in Release 5.1.
Defaults to blank, which disables this feature.
Reg Retry Long Random
Delay
Random delay range (in seconds) to add to <Register
Retry Long Intvl> when retrying REGSITER after a
failure. This feature was added in Release 5.1.
Defaults to blank, which disables this feature.
Parameter Description
To Next Page
Loading...
Need help?
General
