Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 261
B
CW Act Code Enables call waiting on all calls.
Defaults to *56.
CW Deact Code Disables call waiting on all calls.
Defaults to *57.
CW Per Call Act Code Enables call waiting for the next call.
Defaults to *71.
CW Per Call Deact Code Disables call waiting for the next call.
Defaults to *70.
Block CID Act Code Blocks caller ID on all outbound calls.
Defaults to *67.
Block CID Deact Code Removes caller ID blocking on all outbound calls.
Defaults to *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
Defaults to *81.
Block CID Per Call Deact
Code
Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block ANC Act Code Blocks all anonymous calls.
Defaults to *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
Defaults to *87.
DND Act Code Enables the do not disturb feature.
Defaults to *78.
DND Deact Code Disables the do not disturb feature.
Defaults to *79.
Secure All Call Act Code Makes all outbound calls secure.
Defaults to *16.
Parameter Description

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q