Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 262
B
Secure No Call Act Code Makes all outbound calls not secure.
Defaults to *17.
Secure One Call Act Code Makes the next outbound call secure. (It is redundant if
all outbound calls are secure by default.)
Defaults to *18.
Secure One Call Deact Code Makes the next outbound call not secure. (It is
redundant if all outbound calls are not secure by
default.)
Defaults to *19.
Paging Code The star code used for paging the other clients in the
group.
Defaults to *96.
Call Park Code The star code used for parking the current call.
Defaults to *38.
Call Pickup Code The star code used for picking up a ringing call.
Defaults to *36.
Call UnPark Code The star code used for picking up a call from the call
park.
Defaults to *39.
Group Call Pickup Code The star code used for picking up a group call.
Defaults to *37.
Media Loopback Code The star code used for media loopback.
Defaults to *03.
Parameter Description

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q