Cisco SPA303 Administration Guide

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 3
Contents
Enabling Paging (Intercom) 59
Single Page 59
Group Paging 59
Configuring a Phone to Automatically Accept Pages 60
Configuring Paging Groups 60
Enabling Secure Call 62
Enabling Service Announcements 62
Customizing Phone Softkeys 62
Programmable Softkeys 67
Configuration Example 68
Configuring the Message Waiting Indicator 69
Configuring Ring Tones 70
Configuring On-Demand Ring Tones (Cisco SPA525G/525G2) 71
User-Created MP3 Ring Tones (Cisco SPA525G/525G2) 72
Creating and Uploading Ring Tones Using the Ring Tone Utility
(Cisco SPA30X and Cisco SPA50XG only) 72
Assigning a Ring Tone to an Extension 73
Configuring RSS Newsfeeds on the Cisco SPA525G/525G2
IP Phone 74
Configuring Audio Settings 75
Configuring Audio Input Gain (Cisco SPA300 Series and
Cisco SPA500 Series) 76
Enabling Wireless (Cisco SPA525G/525G2 only) 77
Configuring Bluetooth (Cisco SPA525G/525G2 only) 77
Enabling Bluetooth (Cisco SPA525G/525G2) 77
Using a Bluetooth Headset (Cisco SPA525G/525G2) 78
Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled Mobile Phone 80
Initiating Pairing from the Cisco SPA525G2 80
Initiating Pairing from Your Bluetooth-Enabled Mobile Phone 81
Enabling SMS Messaging 82
Enabling the Web Server 84
Configuring Lightweight Directory Access Protocol (LDAP) for the
Cisco SPA300 Series and Cisco SPA500 Series IP Phones 85

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q