OPERATING THE TRANSCEIVER
UPGRADING THE TRANSCEIVER VIA A USB STICK
124 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
1 Do one of the following:
• Press or to scroll to the profile, firmware
package, or key set file, press (Options),
scroll to Open, then press (Select).
• Press or to scroll to the folder in which you
want to save the profile from the transceiver, then
press (Save).
1 Press (Yes) to confirm that you want to complete the
selected action.
1 Perform more tasks with the USB stick as required.
1 Press (Eject) when you have finished working with
the USB stick.
1 Remove the USB stick from the control point.
To Next Page
Loading...
Need help?
General
