Dalsa Genie Nano Series User Manual

Nano Series GigE Vision Camera Operational Reference • 219
Timestamp Modulo Actual
Start Time
timestampModuloActualStartTime Displays the actual modulo event start time as
used by the device. When the user specified
“timestampModuloStartTime” is in the future,
timestampModuloActualStartTime=
timestampModuloStartTime. When the user
specified “timestampModuloStartTime” has already
past, the camera automatically recalculates a
future value for “timestampModuloStartTime”
using the user set “timestampModulo” feature
value. This new start time is reported by
“timestampModuloActualStartTime”.
1.03
Expert
DFNC
Frame Start Event ID EventFrameStart Event ID to identify the EventFrameStart software
Event. (RO)
1.00
Guru
Exposure Start Event ID EventExposureStart Event ID to identify the EventExposureStart
software Event. (RO)
1.00
Guru
Exposure End Event ID EventExposureEnd Event ID to identify the EventExposureEnd
software Event. (RO)
1.00
Guru
Readout Start Event ID EventReadoutStart Event ID to identify the EventReadoutStart
software Event. (RO)
1.00
Guru
Readout End Event ID EventReadoutEnd Event ID to identify the EventReadoutEnd software
Event. (RO)
1.00
Guru
Valid Frame Trigger Event
ID
EventInvalidFrameTrigger Event ID to identify the EventInvalidFrameTrigger
software Event. (RO)
1.00
Guru
InvalidFrameTrigger Event
ID
EventInvalidFrameTrigger Event ID to identify the EventInvalidFrameTrigger
software Event. (RO)
1.00
Guru
AcquisitionStartNextValid
Event ID
EventAcquisitionStartNextValid Event ID to identify the
EventAcquisitionStartNextValid software Event.
(RO)
1.00
Guru
ImageLost Event ID EventImageLost Event ID to identify the EventImageLost software
Event. (RO)
1.00
Guru
Counter 1 End ID EventCounter1End Event ID to identify the EventCounter1End
software Event. (RO)
1.06
Guru
Line1 Rising Edge ID EventLine1RisingEdge Event ID to identify the EventLine1RisingEdge
software Event. (RO)
1.08
Guru
Line2 Rising Edge ID EventLine2RisingEdge Event ID to identify the EventLine2RisingEdge
software Event. (RO)
1.08
Guru
Line1 Falling Edge ID EventLine1FallingEdge Event ID to identify the EventLine1FallingEdge
software Event. (RO)
1.08
Guru
Line2 Falling Edge ID EventLine2FallingEdge Event ID to identify the EventLine2FallingEdge
software Event. (RO)
1.08
Guru
Events Overflow Event ID EventeventsOverflow Event ID to identify the EventeventsOverflow
software Event. (RO)
1.00
Guru
I Timestamp Latch GevtimestampControlLatch Latch the current timestamp internal counter value
in the timestampValue feature.
1.00
Invisible
I Timestamp Value GevtimestampValue Returns the 64-bit value of the timestamp counter.
1.00
Invisible
I Timestamp Tick
Frequency
GevtimestampTickFrequency Indicates the number of timestamp ticks (or
increments) during 1 second (frequency in Hz).
1.00
Invisible
I Timestamp Reset GevtimestampControlReset Resets the timestamp counter to 0.
1.00
Invisible

Dalsa Genie Nano Series Specifications

General

Brand	Dalsa
Model	Genie Nano Series
Category	Security Camera
Language	English