316 • Revision History Nano Series GigE Vision Camera
Revision History
Revision Date Major Change Description
R:0001 September 15, 2015 Initial release
R:0002 September 17, 2015 Additional I/O technical specifications, etc.
R:0003 September 18, 2015 Additional information on optional accessories, etc.
R:0004 September 23, 2015 Added “EC & FCC Declaration of Conformity” (models M/C1920 & M/C1940), etc.
R:0005 October 1, 2015 Correction to S/N spec. Expansion of TriggerOverlap feature.
R:0006 November 11, 2015
Addition of Cycling, Flip and Metadata features. Additional I/O details on
interfacing and operational specifications. Updates to various specifications.
R:0007 January 21, 2016 Addition of OnSemi sensor models with their unique features and specifications.
R:0008 February 22, 2016 Addition of OnSemi sensor models 2M and 5M.
R:0009 March 29, 2016
Additional features and functionality
(LUT, Action Commands, PTP support, Modulo Timestamp acquisition control).
R:0010 April 29, 2016
Addition of 4 Sony monochrome sensor models 5.1M and 3.2M w/two
sensitivities
R:0011 June 10, 2016 Addition of 4 Sony color sensor models 5.1M and 3.2M w/two sensitivities
R:0012 July 8, 2016
Driver 1.04 adds Auto Brightness, White Balance, Pixel Replacement, etc.
features to various camera models.
R:0013 November 3, 2016
Driver 1.05 adds various color model features, plus addition of 4 Sony sensor
(Mono/Color) models with 9m and 12M sensors.
Optional hardware model with “3 outputs / 1 Input” introduced.
R:0014 January 30, 2017
Addition of low cost Sony sensor Nano models 8.9M and 12M.
Addition of NanoXL models using OnSemi 25M and 16M sensors.
R:0015 May 4, 2017
Driver 1.06 adds a few features and improvements.
Improvements to information specific to individual models.
Introduction of the OnSemi low cost 18M model (with rolling shutter).
R:0016 July 11, 2017
Improvements to information specific to various individual models.
Expansions of specification tables to separate firmware versions for readability.
Corrections to various model specifications.
R:0017 August 1, 2017
Improvements and corrections to I/O mating connector details and other
Hyperlinks.
R:0018 November 7, 2017
Driver 1.07 adds various features.
Addition of new models with OnSemi P3 sensors.
Addition of Defective Pixel Replacement algorithm Method 3 replacing Method 4.
R:0019 December 4, 2017
Improved camera model specifications.
‘Open Source Software Licenses’ statement added to camera firmware overview.
R:0020 March 7, 2018 Addition of new models and improved reference information. Release of 1.07.
R:0021 October 18, 2018
Polarized model. Special order models. IP67 case description. Various updates
and improvements.
R:0022 May 29, 2019 Feature set updates, addition of M/C1950 models, and various corrections.
R:0023 October 26, 2020 Model updates, a few feature corrections, additional IR filter information.
R:0024 February 12, 2021
Addition of Sony M/C810 sensor models, a few corrections and updates, updated
parts number, new EC & FCC Declaration of conformity.
To Next Page
Loading...
Need help?
General
