2 • Genie Nano Series Overview Nano Series GigE Vision Camera
Genie Nano Overview
• Optimized, rugged design with a wider operating temperature
• Available in multiple sensors/resolutions, monochrome and color
• Higher frame rates with Teledyne DALSA GigE Vision TurboDrive Technology
• Visual camera multicolor status LED on back plate
• Multi-ROI support
• 2 (default models) general purpose opto-coupled inputs
• 2 (default models) general purpose opto-coupled outputs (user, counter, or timer driven for
Strobe and Flash triggering)
• Flexible general purpose Counter and Timer functions available for internal and external
controls
• Software and hardware Events available to support imaging applications
• Cycling mode supports 64 multiple camera setups (including Multi-Exposure)
• Auto brightness (i.e. auto exposure and AGC) available on many models
• In-sensor and/or FPGA (digital) Binning available on monochrome models
• Supports Image Time-Stamp based on IEEE1588-2008 (PTP: Precise Time Protocol) or an
Internal Timer
• Programmable Look-Up-Table (programmable LUT or preset Gamma) available
• Defective Pixel replacement available on some models
• Multicast and Action Command supported
• Image metadata supported
• Supports Power Over Ethernet (PoE) or auxiliary power input
• Implements 32 MB of Flash Memory
• 2 User Settings sets to store and recall camera configurations
• Supports the Gigabit Ethernet PAUSE Frame feature
• GigE Vision 1.2 compliant
• Gigabit Ethernet (GigE) interconnection to a computer via standard CAT5e or CAT6 cables
• Gigabit Ethernet (GigE) transfer speed up to 115 MB/second
• Application development with the freely available Sapera™ LT software libraries
• Native Teledyne DALSA Trigger-to-Image Reliability design framework
• Refer to the Operation Reference and Technical Specifications section of the manual for full
details
• Refer to the Sapera LT 8.10 release notes for information on GigE Vision and TurboDrive
Technology support.
Camera Firmware
Teledyne DALSA Genie Nano camera firmware contains open source software provided under
different open source software licenses. More information about these open source licenses can be
found in the documentation that accompanies the firmware, which is available on the Teledyne
DALSA website at www.teledynedalsa.com or downloaded directly from the Nano.
Important: Genie Nano firmware updates are available for download from the Teledyne DALSA
web site www.teledynedalsa.com/imaging/support/downloads. Choose Genie Nano Firmware from
the available download sections, then choose the zip file download specific to your camera model.
When using Sapera LT, update the camera firmware using CamExpert (see File Access via the
CamExpert Tool). The Camera firmware can easily be upgraded within your own application via the
API. The camera has a failsafe scheme which prevents unrecoverable camera errors even in the
case of a power interruption.
To Next Page
Loading...
Need help?
General
