Nano Series GigE Vision Camera Technical Specifications • 259
Computer Requirements for Nano Cameras
The following information is a guide to computer and networking equipment required to support the
Nano camera at maximum performance. The Nano camera series complies with the current Ipv4
Internet Protocol, therefore current Gigabit Ethernet (GigE) equipment should provide trouble free
performance.
Host PC System
• Refer to your GigE-Vision compliant SDK for computer requirements.
Recommended Network Adapters
• GigE network adapter (either add on card or on motherboard). The Intel PRO/1000 MT
adapter is an example of a high performance NIC. Typically a system will need an Ethernet
GigE adapter to supplement the single NIC on the motherboard.
• PCI Express adapters will outperform PCI adapters.
• Network adapters that support Jumbo Frames will minimize CPU utilization.
• Important: 10/100 Mb Ethernet is not supported by the Genie Nano series of cameras. The
Genie Nano Status LED will show that it acquired an IP address (solid Blue) but the Nano
will not respond or function at these slower connections.
To Next Page
Loading...
Need help?
General
