Dalsa Genie Nano Series - Firmware Files for C1950; Spectral Response (Model C1950)

32 • Sony Sensor Models Nano Series GigE Vision Camera
On-Board Image Memory 90MB
Output Dynamic Range (dB) 75.4 dB
SNR (dB) 39.6 dB
Firmware Files for C1950
The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for this model are listed below. The xx denotes the build number.
Standard 8-bit Design
“Genie_Nano_Sony_IMX25x_IMX392_2.4M-3.2M-5.1M-9M-12M_Bayer_Standard_Firmware_8CA18.xx.cbf”
Standard 12-Bit Design
“Genie_Nano_Sony_IMX25x_IMX392_2.4M-3.2M-5.1M-9M-12M_Bayer_STD_12b_Firmware_8CA18.xx.cbf”
RGB Output Design
“Genie_Nano_Sony_IMX25x_IMX392_2.4M-3.2M-5.1M-9M-12M_RGB_Output _Firmware_8CA18.xx.cbf”
Spectral Response (model C1950)
The response curves describe the sensor, excluding lens and light source characteristics.
Models C1950