238 • Operational Reference Nano Series GigE Vision Camera
Updating Firmware via File Access in CamExpert
• Click on the “Setting…” button to show the file selection menu.
• From the File Type drop menu, select the file Type that will be uploaded to the Genie
Nano. This CamExpert tool allows quick firmware changes or updates, when available for
your Genie Nano model.
• From the File Selector drop menu, select the Genie Nano memory location for the
uploaded data. This menu presents only the applicable data locations for the selected file
type.
• Click the Browse button to open a typical Windows Explorer window.
• Select the specific file from the system drive or from a network location.
• Click the Upload button to execute the file transfer to the Genie Nano.
• Reset the Nano when prompted.
Overview of the deviceUserBuffer Feature
The feature deviceUserBuffer allows the machine vision system supplier access to 4 kB of reserved
flash memory within the Genie Nano. This memory is available to store any data required, such as
licensing codes, system configuration codes, etc. as per the needs of the system supplier. No Nano
firmware operation will overwrite this memory block thus allowing and simplifying product tracking
and control.
Overview of Color Correction Coefficients
The Sapera LT SDK provides a color correction tool and information about generating coefficients
for color cameras with RGB output design firmware.
To Next Page
Loading...
Need help?
General
