Dalsa Genie Nano Series User Manual

Nano Series GigE Vision Camera Operational Reference • 237
Failure Failure The last file operation has completed unsuccessfully for an
unknown reason.
File Unavailable FileUnavailable The last file operation has completed unsuccessfully
because the file is currently unavailable.
File Invalid FileInvalid The last file operation has completed unsuccessfully
because the selected file in not present in this camera
model.
File Operation Result FileOperationResult Displays the file operation result. For Read or Write
operations, the number of successfully read/written bytes
is returned. < Guru >
1.00
1.06
File Size FileSize Represents the size of the selected file in bytes. < Guru >
1.00
1.06
Device User Buffer deviceUserBuffer Unallocated memory available to the user for data storage.
< Invisible >
1.00
DFNC
1.06
User Defined Saved Image
Max Size
userDefinedSavedImageMax
Size
Maximum size of the user Defined Saved Image in the
flash memory. < Invisible >
1.00
DFNC
1.06
Save Last Image to Flash saveLastImageToFlash Command that saves the last acquired image to camera
flash memory. Use the file transfer feature to read the
image from camera. Maximum image size is 1024x768
pixels in the Nano’s model maximum pixel depth
(monochrome or raw Bayer). < Invisible >
1.05
DFNC
1.06

Dalsa Genie Nano Series Specifications

General

Brand	Dalsa
Model	Genie Nano Series
Category	Security Camera
Language	English