236 • Operational Reference Nano Series GigE Vision Camera
Factory Flat Line coefficients 7 FlatFieldCoefficients07 Select factory Flat Line coefficients7. These are the factory
values used when the camera fastReadoutMode is Active
and sensor Gain is 1.87.
—
1.06
Factory Flat Line coefficients 8 FlatFieldCoefficients08 Select factory Flat Line coefficients 8. These are the
factory values used when the camera fastReadoutMode is
Active and sensor Gain is 3.17.
— 1.06
User Flat Line coefficients 1 FlatFieldCoefficients1 Select user flatfield coefficients1. These are the coefficient
values used when the sensor analog Gain is 1.0.
— 1.06
User Flat Line coefficients 2 FlatFieldCoefficients2 Select user flatfield coefficients2. These are the coefficient
values used when the sensor Gain is 1.26.
— 1.06
User Flat Line coefficients 3 FlatFieldCoefficients3 Select user flatfield coefficients3. These are the coefficient
values used when the sensor Gain is 1.87.
— 1.06
User Flat Line coefficients 4 FlatFieldCoefficients4 Select user flatfield coefficients4. These are the coefficient
values used when the sensor Gain is 3.17.
— 1.06
User Defined Saved Image userDefinedSavedImage Upload and download an image in the camera. 1.04 1.06
Open Source Licenses SoftwareLicenses Open Source Software Licenses. 1.07 1.07
File Operation Selector FileOperationSelector Selects the target operation for the selected file in the
device. This operation is executed when the File Operation
Execute feature is called. < Guru >
1.06
Open Open Select the Open operation – executed by
FileOperationExecute.
Close Close Select the Close operation – executed by
FileOperationExecute
Read Read Select the Read operation – executed by
FileOperationExecute.
Write Write Select the Write operation – executed by
FileOperationExecute.
Delete Delete Select the Delete operation – executed by
FileOperationExecute.
File Operation Execute FileOperationExecute Executes the operation selected by File Operation Selector
on the selected file. < Guru >
1.06
User Defined Saved Image userDefinedSavedImage Upload or download an image in the camera.
< DFNC – Guru >
1.06
File Open Mode FileOpenMode Selects the access mode used to open a file on the device.
< Guru >
1.06
Read Read Select READ only open mode
Write Write Select WRITE only open mode
File Access Buffer FileAccessBuffer Defines the intermediate access buffer that allows the
exchange of data between the device file storage and the
application. < Guru >
1.06
File Access Offset FileAccessOffset Controls the mapping offset between the device file
storage and the file access buffer. < Guru >
1.06
File Access Length FileAccessLength Controls the mapping length between the device file
storage and the file access buffer. < Guru >
1.06
File Operation Status FileOperationStatus Displays the file operation execution status. < Guru >
1.06
Success Success The last file operation has completed successfully.
To Next Page
Loading...
Need help?
General
