120 Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
no sntp server {
ipv4-address
|
ipv6-address
|
ipv6z-address
|
hostname
}
Parameters
•
ipv4-address
—Specifies the server IPv4 address.
•
ipv6-address
—Specifies the server IPv6 address. A Link Local address
(IPv6Z address) can be defined.
•
pv6z-address
—
Specifies the IPv6Z address to ping. The IPv6Z address
format is:
ipv6-link-local-address
}
%
{
interface-name
}. The subparameters
are:
• ipv6-link-local-address—Specifies the IPv6 Link Local address.
• interface-name—Specifies the outgoing interface name. The interface
name has the format:
vlan
{
integer
} |
ch
{
integer
} |
isatap
{
integer
}
| {
physical-port-name
}. The subparameter integer has the format:
{
decimal-digit
} | {
integer
}{
decimal-digit
}. (Range for the decimal-
digit: 0–9)
•
hostname
—Specifies the server hostname. Only translation to IPv4
addresses is supported. (Length: 1–158 characters. Maximum label length:
63 characters)
•
poll
—Enables polling.
•
key
keyid
—Specifies the Authentication key to use when sending packets
to this peer. (Range:1–4294967295)
Default Configuration
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
The sntp unicast client enable Global Configuration mode command
enables predefined unicast clients.
The sntp unicast client poll Global Configuration mode command globally
enables polling.
To Next Page
Loading...
