Dell PowerConnect PC5524

164 SNMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]}
[context name]
Parameters
• groupname —Specifies the group name. (Length: 1–30 characters)
•
v1 —Specifies the SNMP Version 1 security model.
•
v2 —Specifies the SNMP Version 2 security model.
•
v3 —Specifies the SNMP Version 3 security model.
•
noauth —Specifies no packet authentication. Applicable only to the SNMP
Version 3 security model.
•
auth —Specifies packet authentication without encryption. Applicable
only to the SNMP Version 3 security model.
•
priv —Specifies packet authentication with encryption. Applicable only to
the SNMP Version 3 security model.
•
notify notifyview —Specifies the view name that enables specifying an
inform or a trap. Applicable only to the SNMP Version 3 security model.
(Length: 1–30 characters)
•
read readview —Specifies the view name that enables viewing only the
agent contents. (Length: 1–30 characters)
•
write writeview —Specifies the view name that enables entering data and
configuring the agent contents. (Length: 1–30 characters)
Default Configuration
No group entry exists.
If notifyview is not specified, nothing is defined for the notify view.
If readview is not specified, all objects except for the community-table and
SNMPv3 user and access tables are available.
If writeview is not specified, nothing is defined for the write view.
Command Mode
Global Configuration mode