220 AAA Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\AAA.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default Configuration
The local user database is the default authentication method. This is the
same as entering the command aaa authentication login local.
NOTE:
If an authentication method is not defined, console users can log in without any
authentication verification.
Command Mode
Global Configuration mode
User Guidelines
The default and additional list names created with the aaa authentication
login command are used with the login authentication command.
Create a list by entering the aaa authentication login list-name method
command for a particular protocol, where list-name is any character string
used to name ) this list. The method argument identifies the list of methods
that the authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. Specify none as the final method in the
command line to ensure that the authentication succeeds even if all methods
return an error.
Example
The following example sets the authentication login methods.
Console (config)#
aaa authentication login default radius local
enable none
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.
To Next Page
Loading...
