234 AAA Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\AAA.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
The software does not send “start”/“stop” messages if the port is force-
authorized.
The software does not send “start”/“stop” messages for hosts that are sending
traffic on the guest VLAN or on the unauthenticated VLANs.
The following table describes the supported Radius accounting Attributes
Values and when they are sent by the switch.
Example
console(config)#
aaa accounting dot1x
start-stop group radius
Name Start Stop Description
User-Name (1) Yes Yes Supplicant’s identity.
NAS-IP-Address (4) Yes Yes The switch IP address that is used
for the session with the Radius
server.
NAS-Port (5) Yes Yes The switch port from where the
supplicant has logged in.
Class (25) Yes Yes Arbitrary value is included in all
accounting packets for a specific
session.
Called-Station-ID (30) Yes Yes The switch MAC address.
Calling-Station-ID (31) Yes Yes The supplicant MAC address.
Acct-Session-ID (44) Yes Yes A unique accounting identifier.
Acct-Authentic (45) Yes Yes Indicates how the supplicant was
authenticated.
Acct-Session-Time (46) No Yes Indicated how long the supplicant
was logged in.
Acct-Terminate-Cause (49) No Yes Reports why the session was
terminated.
Nas-Port-Type (61) Yes Yes Indicates the supplicant physical port
type.
To Next Page
Loading...
