DHCP Snooping and ARP Inspection Commands 573
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DHCP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
no ip dhcp snooping binding mac-address vlan-id
Parameters
•
mac-address
— pecifies a MAC address.
•
vlan-id
—Specifies a VLAN number.
•
ip-address
—Specifies an IP address.
•
interface-id
—Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
•
expiry
seconds
—Specifies the time interval, in seconds, after which the
binding entry is no longer valid. (Range: 10–4294967295)
•
expiry infinite
—Specifies infinite lease time.
Default Configuration
No static binding exists.
Command Mode
Privileged EXEC mode
User Guidelines
After entering this command, an entry is added to the DHCP Snooping
database. If the DHCP Snooping binding file exists, the entry is also added to
that file.
The entry is displayed in the show commands as a DHCP Snooping entry.
The user cannot delete dynamic temporary entries for which the IP address is
0.0.0.0.
Example
The following example adds a binding entry to the DHCP Snooping binding
database.
Console#
ip dhcp snooping binding
0060.704C.73FF 23 176.10.1.1
ethernet
1/5
expiry
900
To Next Page
Loading...
