Dell PowerConnect PC5524

699
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 2012 - FOR PROOF ONLY
Syntax
deny protocol {any | source source-wildcard} {any | destination destination-
wildcard} [dscp number | precedence number] [time-range time-range-
name] [disable-port | log-input]
deny icmp {any | source source-wildcard} {any | destination destination-
wildcard{any|icmp-type} {any|icmp-code} [dscp number | precedence
number] [time-range time-range-name] [disable-port | log-input
]
deny
igmp {any | source source-wildcard} {any | destination destination-
wildcard}[igmp-type] [dscp number | precedence number] [time-range
time-range-name] [disable-port | log-input]
deny tcp {any | source source-wildcard} {any|source-port/port-range}{any |
destination destination-wildcard} {any|destination-port/port-range } [dscp
number | precedence number] [match-all list-of-flags] [time-range time-
range-name] [disable-port | log-input]
deny udp {any | source source-wildcard} {any|source-port/port-range} {any
| destination destination-wildcard} {any|destination-port/port-range } [dscp
number | precedence number] [match-all time-range-name] [time-range
time-range-name] [disable-port | log-input]
Parameters
• protocol—The name or the number of an IP protocol. Available protocol
names: icmp, igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, ipv6, ipv6:rout,
ipv6:frag, idrp, rsvp, gre, esp, ah, ipv6:icmp, eigrp, ospf, ipinip, pim, l2tp,
isis. To match any protocol use the Ip keyword. (Range: 0–255)
• source—Source IP address of the packet.
• source-wildcard—Wildcard bits to be applied to the source IP address.
Use 1s in the bit position that you want to be ignored.
• destination—Destination IP address of the packet.
• destination-wildcard—Wildcard bits to be applied to the destination IP
address. Use 1s in the bit position that you want to be ignored.
• dscp number—Specifies the DSCP value.
• precedence number—Specifies the IP precedence value.
• icmp-type—Specifies an ICMP message type for filtering ICMP packets.
Enter a number or one of the following values: echo-reply, destination-
unreachable, source-quench, redirect, alternate-host-address, echo-
request, router-advertisement, router-solicitation, time-exceeded,