Dell PowerConnect PC5524 - Page 746

746 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
The policers option is relevant for a VLAN interface only.
If no parameter is specified with the show qos interface command, the port
QoS mode (DSCP trusted, CoS trusted, untrusted, and so on), default CoS
value, DSCP-to-DSCP- map (if any) attached to the port, and policy map (if
any) attached to the interface are displayed. If a specific interface is not
specified, the information for all interfaces is displayed.
Example
This is an example of the output from the show qos interface buffers
command for 8 queues.
Console> show qos interface buffers gi1/0/1
gi1/0/1
Notify Q depth:
buffers gi2/0/1
Ethernet gi2/0/1
qid thresh0 thresh1 thresh2
1 100 100 80
2 100 100 80
3 100 100 80
4 100 100 80
5 100 100 80
6 100 100 80
7 100 100 80
8 100 100 80