Develop ineo 250 - IU Motor; Main Motor

Field Service Ver. 1.0 Aug. 2005 7. Other
85
bizhub 200/250/350Maintenance
7.3.34 Main Motor
1. Remove the Upper Rear Cover.
☞ 50
2. Remove the Rear Cover.
☞ 51
3. Remove the Rear Right Cover.
☞ 50
4. Remove two screws [1] and the
Ozone Filter Assy [2].
5. Remove four screws [3], disconnect
the connector [4], and remove the
Main Motor [5].
7.3.35 IU Motor
1. Remove the Upper Rear Cover.
☞ 50
2. Remove the Rear Cover.
☞ 51
3. Remove four screws [1], disconnect
the connector [2], and remove the IU
Motor [3].
4040F2C617DA
[1]
[2]
4040F2C618DA
[3]
[3]
[4]
[5]
4040F2C619DA
[1]
[1]
[2]
[3]